VAP11G is developed by HouTian Technology,is 802.11B/G WiFi bridge that is provided network cable specifically for the emerging IP monitoringsolution.
IP Camera/Dreambox/IP TV best partner
---VAP11G WiFi Bridge
Support WiFi model
IEEE 802.11B/G WiFi compliant
Small and light weight,easy to hang on the wall such as the location that the wire should not be
Input Voltage:DC5V-15V,Consumed power:Less than 1.5W
VAP11G is a 802.11B / G WiFi Bridge (wireless bridge) equipment that independently developed by Houtian Network that specifically for smart TVs, set-top boxes,IP carmera, DreamBOX and other equipments to provide network cable , the user manual of VAP11G is described as below:
Step 1: Configure, use CD-ROM shipped with the product, install the setting software in accordance with the instructions inside, configure the wireless network, all operations are stupid action, click "NEXT" all the way;
Step 2: Find the RJ45 network interface and USB interface of DreamBOX;
Step 3: Connect the RJ45 network interface of DreamBOX , USB cable for connecting USB port of DreamBOX
Note: (USB is for power supply, forbid to external power and USB power supply simultaneously)
1.Introduction for WiFi Bridge
Thanks for choosing VAP11G WiFi Bridge.With this portable device,IP Camera and other
IP products with Ethernet RJ45 port can access wireless network easily.
2.Setup for WiFi Bridge
Please set this VAP11G before using it,you can connect it to PC and run the VAP11G_Setup.
exe in the CD.
a.Please put into the CD-ROM,the systerm will automatically eject the disk and guide page.
b.Please click Install Software label to run the set up program,if it's shown please click Next,
Click Cancel to exit the installation Wizard
c.Please click Yes to install WINPCAP program.
d.Please click Next,don't need to do other settings until Finish.
e.After the installation is complete,please double click the desktop icon,the right picture shows
it is searching the product MAC.
f.Complete to search MAC,please click Next.
g.Shows the product has searched the WiFi network,please choose the correct WiFi Network.
WPA automatically uses TKIP with dynamic encryption keys.Enter a passphrase on this screen.
Encryption-TKIP is automatically selected as the encryption method.
Click Next to proceed,or click Back to return to the previous screen.
WPA2 automatically uses AES with dynamic encryption keys(AES is a stronger encryption
method than TKIP).
Enter a passphrase on this screen.
Encryption-AES isautomatically selected as the encryption method.
Click Next to proceed,or click Back to teturn to the previous screen.
WEP(128-Bit) or WEP(64-Bit)
Enter a passphrase in the Passphrase field and click Next,if you want to manually enter a WEP
key,leave the Passphrase field blank and click Next.
Key 1-4 One to four fields will be displayed,depending on the level of encryption you have selected
The WEP key you enter must match the WEP key of you wireless network.For 64-bit WEP encryption